haut
STS1000 Series Static Transfer Switch(110Vac/220Vac) Öth
1. Specification
1.Switch over between two power suppliers
2.Automatic Selection of batter supply
3.Switch over time less than 4s
4.Any two AC power supplies with sinusoidal output, high adaptability
5.Provide RS485 communication and Dry contact, support SNMP remote
Modèle
Single cut type UP-STS16S UP-STS25S UP-STS32S UP-STS40S UP-STS45S
Double cut type UP-STS16D UP-STS25D UP-STS32D UP-STS40D UP-STS45D
Phase Single Phase
output current 16UN 25UN 32UN 40UN 45UN
Max allow current 18UN 28UN 35UN 45UN 50UN
Entrée CA
AC Input voltage 110Vac/220Vac
Input voltage range 90~130Vac@110Vac; 190~260Vac@220Vac
Tension de travail valide ±12%, contrecoup ± 5V
Fréquence 50Hz/60Hz(set in factory)
Power off voltage 110V: ≤55Vac Or ≥135Vac,backlash±5V≤55Vac Or ≥135Vac,backlash±5V 220V: ≤190Vac Or ≥260Vac,backlash±5V≤190Vac Or ≥260Vac,contrecoup ± 5V
Fréquence éteinte ≤45Hz or ≥65Hz,Tension de mise hors tension = ± 0,2 Hz
Temps de commutation <4MS
Capacité de surcharge Load current is 110%, operating continuously
Load current> 110%, immediately shut-off;
Working Environment
Dielectric strength 2000Vac/10mA/60s
Humiditty 0%~90%, no moisture condensation
Work temperature -25℃~50℃
Température de stockage -40℃ ~ 70 ℃
Bruit(1m) <55dB
Size(MM) 482*44.5*343(1U)
Communitcation RS485/SNMP

Leave a Reply

Your email address will not be published. Required fields are marked *

Discuter avec Kristin
déjà 1902 messages

  • Kristin 10:12 SUIS, Aujourd'hui
    Heureux de recevoir votre message, Et c'est Kristin RÉPONSE pour vous